The HA-872 is a UK made, multi pattern, condenser, FET mic, utilizing an isolated backplane capsule.
Each HA-872 is entirely hand built, this includes the plating which gives each mic its own slightly unique look. Designed for studio use where the neutral balanced character of a microphone can really shine, the HA-872 has excellent off axis response, and a huge dynamic range. It captures virtually any source at a variety of distances, and the triple layer headbasket design reduces the need for pop-shields & reflection filters. It also helps to lessen the proximity effect from close sound sources. Its frequency response in “classic” mode calls back to classic FET microphones of the 70’s, with a significantly reduced high end “peak”. However, should the situation require, the “DE-emphasis” can be totally removed with a switch providing a more open sound typical of a more modern condenser. There is also a three position low cut switch, giving a bit more flexibility when recording bass heavy sources.
The microphone is comes with a custom shock-mount to keep the mic stable in any location, and a high quality 3 meter cable, all of which comes in a custom flight case with pre-cut foam inside and a 3 year warranty!
Available to order and in stores Now!
We are currently taking orders and shipping the HA-872 ! If you are interested in the HA-872 and would like to place an order please email firstname.lastname@example.org or check out our dealers page above.
HA-872 Session Examples
Examples of the HA-872 on vocals. These include a dry 'VOX ONLY' version with no post processing at all, as well as a version of the mix with only reverb and delay on the main vocal, and the fully mastered track just for reference. We are working on getting more examples ready for other sound sources so stay tuned!
ALL THE SOUNDS ARE MADE USING ONLY THE ARTISTS VOICE, THE MIC AND A LOOP PEDAL! ENJOY!
Recording chain: HA-872 -> Neve 1073LB Pre -> Great River PMW501 (almost doing nothing/tiny peak control) -> Neve 551 Inductor EQ (3dB boost at 1.5khz and nothing else, specific for this voice), Into a SSL AlphaLink MX @ 96khz/24bit. Recorded at SilverHammer Productions.
Element: Isolated Dual Back plane 6 micron Mylar - 34mm Center Terminated
Polar Patterns: Cardioid, Omni, Figure of 8
Frequency Response: 20hz-20,000hz (-6db at 50hz)
Open Circuit Sensitivity: 10mv/pa
Noise Level: +14db
Dynamic Range (SPL): 142db at 1khz
Signal - Noise Ratio: 78db
Max Current Draw: 0.4A
Requires 48v Phantom Power
Front Switch - Pattern Select (3 pole switch - Cardioid, Fig.8, Omni)
Low Cut Points - 0Hz/80Hz/180Hz (3 pole switch)
Switchable De-emphasis - (2 pole switch) “Vintage” - “modern”
Size -240mm x 75mm x 75mm (at widest points)
Microphone - 791g, including case, cable and mount - 3.087kg
Available in matched pairs